diff --git a/docs/procedures/procedure-reseau.md b/docs/procedures/procedure-reseau.md
index 7e55ad02f0493fbb8d2de752fbe06877cef1fcf7..ef2982222109922433ddc23be650804f70ee2f2b 100644
--- a/docs/procedures/procedure-reseau.md
+++ b/docs/procedures/procedure-reseau.md
@@ -18,7 +18,7 @@ Nommer switch
     
     Switch>enable
     Switch#conf t
-    Switch#(config)#hostname S1
+    Switch(config)#hostname S1
     S1(config)#exit
     S1#
 
@@ -72,7 +72,7 @@ Organisation interface vlan 3 :
 
     S1#conf t
     S1(config)#vlan 3
-    S1(config-vlan)#interface range fa 0/1 - 12
+    S1(config-vlan)#interface range fa0/1 - 12
     S1(config-if-range)#switchport access vlan 3
     S1(config)#exit
 
@@ -80,14 +80,14 @@ Organisation interface vlan 4 :
 
     S1#conf t
     S1(config)#vlan 4
-    S1(config-vlan)#interface range fa 0/13 - 24
+    S1(config-vlan)#interface range fa0/13 - 24
     S1(config-if-range)#switchport access vlan 4
     S1(config)#exit
 
 Configuration trunk inter-vlan :
 
     S1#conf t
-    S1(config)#interface fa 0/48 1 (Interface GE 0/0) à Routeur
+    S1(config)#interface fa0/48 (interface gig0/0) à Routeur
     S1(config-if)#switchport mode trunk
     S1(config-if)#no shutdown
     S1(config-if)#exit
@@ -111,8 +111,8 @@ Sécuriser avec un mot de passe sur routeur :
 Creation sous-interface VLAN 2 (ROUTEUR)
 
     R1#conf t
-    R1(config)#interface gig 0/0.3
-    R1(config-if)#encapsulation dot1Q 2   
+    R1(config)#interface gig0/0.1
+    R1(config-subif)#encapsulation dot1Q 2   
     R1(config-subif)#ip address 192.168.40.254 255.255.255.0
     R1(config-subif)#ip helper-address 192.168.40.150
     R1(config-subif)#no shutdown
@@ -121,8 +121,8 @@ Creation sous-interface VLAN 2 (ROUTEUR)
 
 Création sous-interface VLAN 3 (ROUTEUR)
 
-    R1(config)#interface gig 0/0.1
-    R1(config-if)#encapsulation dot1Q 3
+    R1(config)#interface gig0/0.2
+    R1(config-subif)#encapsulation dot1Q 3
     R1(config-subif)#ip address 192.168.50.254 255.255.255.0
     R1(config-subif)#ip helper-address 192.168.40.150
     R1(config-subif)#no shutdown
@@ -131,8 +131,8 @@ Création sous-interface VLAN 3 (ROUTEUR)
 
 Création sous-interface VLAN 4 (ROUTEUR)
 
-    R1(config)#interface gig 0/0.2
-    R1(config-if)#encapsulation dot1Q 4 
+    R1(config)#interface gig0/0.3
+    R1(config-subif)#encapsulation dot1Q 4 
     R1(config-subif)#ip address 192.168.60.254 255.255.255.0
     R1(config-subif)#ip helper-address 192.168.40.150
     R1(config-subif)#no shutdown
@@ -189,7 +189,7 @@ Test :
     Sur routeur 1 :
 
     R1#conf t
-    R1(config)#ip nat inside source static 192.168.40.254 10.0.0.1 
+    R1(config)#ip nat inside source static 192.168.10.254 10.0.0.1 
 
 ### A faire sur chaque sous-interface Vlan: