From 3c7a7b8082d2eb3f5d1226c804510ff31b3656ae Mon Sep 17 00:00:00 2001
From: Al Massati Bilal <bilal.almassati.etu@b05p3.fil.univ-lille.fr>
Date: Wed, 4 Jan 2023 14:03:21 +0100
Subject: [PATCH] v7 04/01 final version
---
docs/procedure-reseau.md | 144 +++++++++++++++++++++------------------
1 file changed, 79 insertions(+), 65 deletions(-)
diff --git a/docs/procedure-reseau.md b/docs/procedure-reseau.md
index 1abf7e9..586aea6 100644
--- a/docs/procedure-reseau.md
+++ b/docs/procedure-reseau.md
@@ -22,10 +22,10 @@ Nommer switch
S1(config)#exit
S1#
-Sécuriser avec mot de passe sur switch :
+Sécuriser avec un mot de passe sur switch :
S1#conf t
- S1(config)#enable password "mot de passe"
+ S1(config)#enable password peter
S1(config)#exit
Création des VLANs:
@@ -94,42 +94,56 @@ Configuration trunk inter-vlan :
## Routeur :
+Nommer le routeur
+
+ Router>enable
+ Router#conf t
+ Router(config)#hostname R1
+ R1(config)#exit
+ R1#
+
+Sécuriser avec un mot de passe sur routeur :
+
+ R1#conf t
+ R1(config)#enable password peter
+ R1(config)#exit
+
Creation sous-interface VLAN 2 (ROUTEUR)
- S1#conf t
- S1(config)#interface gig 0/0.3
- S1(config-if)#encapsulation dot1Q 2
- S1(config-subif)#ip address 192.168.40.254 255.255.255.0
- S1(config-subif)#ip helper-address 192.168.40.150
- S1(config-subif)#no shutdown
- S1(config-subif)#exit
+ R1#conf t
+ R1(config)#interface gig 0/0.3
+ R1(config-if)#encapsulation dot1Q 2
+ R1(config-subif)#ip address 192.168.40.254 255.255.255.0
+ R1(config-subif)#ip helper-address 192.168.40.150
+ R1(config-subif)#no shutdown
+ R1(config-subif)#exit
Création sous-interface VLAN 3 (ROUTEUR)
- S1(config)#interface gig 0/0.1
- S1(config-if)#encapsulation dot1Q 3
- S1(config-subif)#ip address 192.168.50.254 255.255.255.0
- S1(config-subif)#ip helper-address 192.168.40.150
- S1(config-subif)#no shutdown
- S1(config-subif)#exit
+ R1(config)#interface gig 0/0.1
+ R1(config-if)#encapsulation dot1Q 3
+ R1(config-subif)#ip address 192.168.50.254 255.255.255.0
+ R1(config-subif)#ip helper-address 192.168.40.150
+ R1(config-subif)#no shutdown
+ R1(config-subif)#exit
Création sous-interface VLAN 4 (ROUTEUR)
- S1(config)#interface gig 0/0.2
- S1(config-if)#encapsulation dot1Q 4
- S1(config-subif)#ip address 192.168.60.254 255.255.255.0
- S1(config-subif)#ip helper-address 192.168.40.150
- S1(config-subif)#no shutdown
- S1(config-subif)#exit
+ R1(config)#interface gig 0/0.2
+ R1(config-if)#encapsulation dot1Q 4
+ R1(config-subif)#ip address 192.168.60.254 255.255.255.0
+ R1(config-subif)#ip helper-address 192.168.40.150
+ R1(config-subif)#no shutdown
+ R1(config-subif)#exit
Activation interface gig0/0
- S1(config)#interface gig0/0
- S1(config-subif)#ip helper-address 192.168.40.150
- S1(config-subif)no shutdown
+ R1(config)#interface gig0/0
+ R1(config-subif)#ip helper-address 192.168.40.150
+ R1(config-subif)no shutdown
Test :
@@ -138,65 +152,65 @@ Test :
## Configuration table de routage // procédure à faire sur le routeur 1
- S1#conf t
- S1(config)#router rip
- S1(config-router)#version 2
- S1(config-router)#network 10.0.0.0
- S1(config-router)#network 192.168.40.0
- S1(config-router)#network 192.168.50.0
- S1(config-router)#network 192.168.60.0
- S1(config-router)#exit
+ R1#conf t
+ R1(config)#router rip
+ R1(config-router)#version 2
+ R1(config-router)#network 10.0.0.0
+ R1(config-router)#network 192.168.40.0
+ R1(config-router)#network 192.168.50.0
+ R1(config-router)#network 192.168.60.0
+ R1(config-router)#exit
### Activation de l'interface gig0/1
- S1(config)#interface gig0/1
- S1(config-if)#ip address 10.0.0.1 255.0.0.0
- S1(config-if)#no shutdown
+ R1(config)#interface gig0/1
+ R1(config-if)#ip address 10.0.0.1 255.0.0.0
+ R1(config-if)#no shutdown
## Configuration table de routage // procédure à faire sur le routeur 2 (deuxième groupe)
- S2#conf t
- S2(config)#router rip
- S2(config-router)#version 2
- S2(config-router)#network 10.0.0.0
- S2(config-router)#network 192.168.10.0
- S2(config-router)#network 192.168.20.0
- S2(config-router)#network 192.168.30.0
- S2(config-router)#exit
+ R2#conf t
+ R2(config)#router rip
+ R2(config-router)#version 2
+ R2(config-router)#network 10.0.0.0
+ R2(config-router)#network 192.168.10.0
+ R2(config-router)#network 192.168.20.0
+ R2(config-router)#network 192.168.30.0
+ R2(config-router)#exit
### Activation de l'interface gig0/1
- S2(config)#interface gig0/1
- S2(config-if)#ip address 10.0.0.2 255.0.0.0
- S2(config-if)#no shutdown
+ R2(config)#interface gig0/1
+ R2(config-if)#ip address 10.0.0.2 255.0.0.0
+ R2(config-if)#no shutdown
## NAT
- Sur routeur :
+ Sur routeur 1 :
- S1#conf t
- S1(config)#ip nat inside source static 192.168.10.254 10.0.0.1
+ R1#conf t
+ R1(config)#ip nat inside source static 192.168.10.254 10.0.0.1
### A faire sur chaque sous-interface Vlan:
- S1#conf t
- S1(config)#interface gig0/0.1
- S1(config-if)#ip nat inside
- S1#(config-if)#exit
+ R1#conf t
+ R1(config)#interface gig0/0.1
+ R1(config-if)#ip nat inside
+ R1#(config-if)#exit
- S1#conf t
- S1(config)#interface gig0/0.2
- S1(config-if)#ip nat inside
- S1#(config-if)#exit
+ R1#conf t
+ R1(config)#interface gig0/0.2
+ R1(config-if)#ip nat inside
+ R1#(config-if)#exit
- S1#conf t
- S1(config)#interface gig0/0.3
- S1(config-if)#ip nat inside
- S1#(config-if)#exit
+ R1#conf t
+ R1(config)#interface gig0/0.3
+ R1(config-if)#ip nat inside
+ R1#(config-if)#exit
### A faire sur l'interface extérieur routeur :
- S1#conf t
- S1(config)#interface GigaEthernet 0/1
- S1(config-if)#ip nat ouside
- S1(config-if)#exit
\ No newline at end of file
+ R1#conf t
+ R1(config)#interface gig0/1
+ R1(config-if)#ip nat ouside
+ R1(config-if)#exit
\ No newline at end of file
--
GitLab